UKAS ACCREDITED CALIBRATION LABORATORY

UKAS Lab 0766

The calibration laboratory of Rotronic Instruments UK Limited is now UKAS accredited for the calibration of humidity and temperature measuring instruments. Our calibration service offers competitive pricing and at typical turnaround time of 72 hours for a three point relative humidity calibration.

Our scope at present covers the following points:

5%rh, 10%rh, 11%rh, 20%rh, 35%rh, 50%rh, 65%rh, 75%rh, 80%rh & 95%rh over a 5...50°C range

Calibration of saturated salt capsules over the range 5 to 95%rh

Temperature calibration of probes in air 0°C to 70°C

Temperature calibration of probes in liquid -10°C to 125°C - This process does not damage Rotronic humidity sensors.

Our scope may be viewed on the UKAS web site:

Link to our UKAS scope

Please feel free to contact either by telephone or email:

Mark Smith

service@rotronic.co.uk

As a customer of Rotronic you will receive:

• Comprehensive twenty four month warranty
• Typical product life with correct maintenance >10 years
• Expert application support throughout the life of the product.
• Free of charge, no obligation, instrument health checks throughout the life of the product.
• Access to our range of service and calibration products which include:
  • Fast turnaround Calibration and Service facility. Our average turnaround time is within 48 hours.
  • In-house or on-site calibration, adjustment, and repairs.
  • All adjustments performed with reference to traceable references - only by prior request and agreement on UKAS Accredited calibrations.

ROTRONIC are fully committed to the science of Hygrometry, and our management are fully active in UK and International standards and committees, so we are fully aware of the increasing demands for quality, validation and certification documentation, and are happy to provide this on request.

Application Support:

The selection of the correct instrument for the measurement of humidity is often more important than the quality of the product itself. If the wrong instrument is specified, the customer and supplier will suffer.

If you are unsure of the correct instrument for your application, we offer a no obligation - free of charge consultation to discuss your application needs in full, and make the appropriate recommendation. If the application would be best served by a different measurement technique or supplier, we will tell you and suggest (from our personal experiences) the best alternative.

For an overview of a wide range of applications in many industries, click on the ‘applications’ link at the top of the page.